Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket immobiliser for the CAN bus. It's discrete, doesn't employ LED indications or key fobs and is hidden within the wiring of the vehicle.
The user can also deactivate the system temporarily by using Transport Mode when renting out their vehicle. This guide will guide you through the steps of installing the Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your car from key hacking attacks, cloning attacks and relay attacks. The system is linked directly to the ECU of your vehicle and protected by a pin code you set. It's undetectable to thieves using diagnostic scanners or other advanced methods, and it is unable to be disabled by circuit cuts.
The system is easy to use, but professional installation is advised to ensure a perfect connection with the ECU of your vehicle. A certified installer from Thatcham can assist with the installation and programming of your Ghost system. They can also suggest a tracking system or alarm to complete the protection package for your vehicle.
The first step is to disconnect your battery to prevent accidental airbag deployment or short circuits. Once this is done the installer is now able to begin work. Basic hand tools are useful for securing connections with precision, while a multimeter can be used to verify electrical values and safety. Insulation tape and cable tie are essential to protect connections and keep wiring neat. The user's manual offers specific instructions specific to your Ghost Immobiliser model.
During the installation, it is important to choose the right grounding location that is free of paint and debris. Installers should also make sure that the immobiliser's wires, CAN H and CAN L are connected to the proper ECU ports. Based on the model, these wires may need to be soldered or plugged into. To ensure a reliable and long-lasting connection, it is recommended that you use a high-quality plug.
Once the install is complete Once the installation is completed, the customer can enable after the installation is complete, the customer can activate Transport Mode. This allows mechanics or valet parking to use the vehicle, without knowing the pin code. To do this, the customer must press the button for service on the dashboard five times within 2 seconds. The system will confirm this by displaying 5 indicators.
The Autowatch Ghost 2 is a highly effective immobiliser that's TASSA certified and Thatcham approved. It's a great option for anyone who regularly rents out their vehicles on platforms such as Turo. An immobiliser can reduce insurance premiums, since it greatly reduces the chance of theft.
Getting Started
You won't have a problem with an autowatch ignition device in order to guard your car from theft. The device prevents your vehicle from starting even if someone steals or copies your key. This is due to its high-tech technology, which is designed to prevent the engine from running until the correct PIN code is entered.
The device connects to the vehicle's CAN bus network which allows it to communicate with the ECU directly. It makes use of the buttons on your dashboard and steering to create a unique sequence, which only you know. This makes it impossible for anyone else to start your car. This is the most secure security system that protects your most precious possessions and will ensure its value in the event that you decide to sell it in the future.
Installing a ghost immobiliser can be an easy process, however, it's important to follow the instructions carefully to avoid problems with the electrical system and malfunctions. First, you must locate and identify a constant 12V power source as well as a good grounding point on the vehicle's chassis. Then, you can begin connecting the wires to the immobiliser. Make car ghost immobiliser to use high-quality connectors and soldering methods to ensure a strong connection. Also, ensure that you insulate the connections with heat shrink tubing or insulation tape to protect them from short circuits in electrical power and other problems.
After the wires are connected, you can plug in the battery and start the engine to test whether the immobiliser is functioning. After you've confirmed that everything is functioning properly and you are satisfied, you can place the immobiliser in a safe place inside the vehicle. Make sure to cover it in a secure manner so that thieves can't alter it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) which means it is a top-quality deterrent to car thieves. It provides superior protection against key cloning, hacking and relay attacks. It isn't able to be disabled unless you know the code. The device is also simple to use and is able to be put into an auto valet mode so that your automobile isn't activated if you take it in for maintenance or an MOT.
Wiring
The Ghost Immobiliser is a cutting-edge security system that's designed to prevent vehicle theft. It is directly connected to the car's CAN bus network and communicates with the ECU and ECU, making it virtually undetectable to your vehicle. Contrary to other aftermarket systems which require the removal of circuit components the Ghost Immobiliser won't interfere with the factory settings for your vehicle.
The system is also undetectable by thieves using diagnostic scanners. The system doesn't transmit or receive radio frequency signals but instead uses CAN data for communication with your ECU. Furthermore, it doesn't require any modification to your vehicle's existing key fobs.
Enter your sequence for disarming (either two or one button) and turn on the ignition of your car to use Ghost Immobiliser. The indicator will flash two times to confirm that you have entered the correct code. After that, you are able to start your car and drive away safely.
Once installed The Ghost Immobiliser can secure your vehicle from key cloning and hacking, while protecting the value of your car's pride and joy. In Transport Mode, you can temporarily disable the Ghost Immobiliser if you have to hand your car to service or valet park.
To complete a Ghost Immobiliser installation, you'll have to find the source of power that is constant (12V) and a grounding point. Make sure that both are well-insulated and safe to touch. Cable ties are also suggested for bundling and securing the wires. This reduces the possibility of theft by thieves. Be sure to double-check the locations of these points to avoid mistakes, and mark them with an adhesive or label. Check all connections for signs that they're getting worn out. Make sure that all connections are firmly in place, and are properly protected. Finally, don't forget to test the Ghost Immobiliser after installation is complete. This will ensure that the unit is working correctly and that all connections and insulation are secure. If there are any issues, make sure to resolve them immediately.
Testing
The Autowatch Ghost immobiliser is a revolutionary vehicle security system that works seamlessly with your vehicle's ECU to prevent the motor from starting without authorization. Its cutting-edge technology protects your vehicle against key cloning and hacking as well as other common methods used by thieves to steal vehicles. The Ghost also works in tandem with other alarm and tracking systems to give the ultimate vehicle protection. This system's unmatched features and secluded design make it a preferred choice for car lovers and security-conscious drivers too.
In order to ensure that the Ghost Immobiliser is properly integrated the Ghost Immobiliser, you must to follow the steps of the installation process. Refer to the wiring diagram for the vehicle as it will help you locate and connect the wires. The next step is to identify the power source as well as grounding points. Once you've located them, you will need to mark the points so that they are easy to locate during installation. It's essential to use high-quality materials and tools. Basic hand tools can help with making precise connections while a multimeter can confirm electrical values and guarantee security. Insulation tape and cable tie ensure that all connections are neat. Additionally, a user's manual will provide specific guidance specific to your Ghost model.
It is important to test the system before installing it. Enter the PIN code into the system and start the vehicle. This test will verify that the immobiliser functions as intended and will stop vehicle starts that are not authorized. This procedure should be carried out regularly as part of your routine inspections of your vehicle to ensure the system is always working correctly.
After the installation is completed, you can start driving your vehicle with confidence. The Ghost will help keep your car and its contents safe from potential thieves and ensure that nobody is able to escape with your car without the correct PIN. The Ghost can be paired with an approved Thatcham tracker, which detects attempts to steal or tamper with. This lets you locate your car if it's stolen.
The Ghost is compatible with a variety of vehicles, including those from the majority of major manufacturers. Monty's Locksmith can help you secure your vehicle using this cutting-edge device. Contact us today to find out more about our services and installation options. We are a TASSA Installer who is registered which guarantees that we adhere to strict guidelines and procedures when installing our products. This assures insurance companies, customers and law enforcement officials that installations are done in a safe and correct manner.